How the two frames compare
Fiberglass
The Department of Energy calls fiberglass frames dimensionally stable, and notes that their air cavities can be filled with insulation for better thermal performance than wood or uninsulated vinyl. In plain terms, fiberglass barely expands or shrinks with temperature, so seals stay tight through a hot Texas summer and a cold snap.
Wood and wood clad
Wood insulates well and looks warm inside. The trade-off, per the DOE, is that bare wood frames need regular maintenance. Cladding the outside with aluminum or vinyl solves most of that, though metal-clad wood may perform slightly worse thermally. ENERGY STAR notes wood is often favored in older or historic neighborhoods where the look matters.
Composite
Composite frames blend materials. The DOE says they can match or beat wood's structural and thermal properties while resisting moisture and decay better. Ask your pro if a composite line fits your budget.
Side by side
| Trait | Fiberglass | Wood clad |
|---|---|---|
| Interior look | Smooth, factory-finished surface | Real wood you can stain |
| Exterior upkeep | Low | Low, thanks to the cladding |
| Thermal note | Cavities can be insulated | Wood insulates well, metal cladding slightly less |
| Typical life (calculator) | About 30 to 50+ years | About 30 to 50+ years |
When a premium frame makes sense
- You plan to stay in the house a long time
- The openings are large, and you want a stiff frame that holds its shape
- You want real wood trim and stain inside
- Your HOA or neighborhood favors a traditional look
If budget comes first, compare against vinyl replacement windows.
Price ranges
| Window | Installed per window | Source |
|---|---|---|
| Aluminum-clad wood | $819 to $1,452 | ProjectCostPro |
| Fiberglass double-hung | $969 to $1,552 | ProjectCostPro |
| Wood double-hung | $975 to $1,652 | ProjectCostPro |
| Fiberglass casement | $1,069 to $1,852 | ProjectCostPro |
| Wood casement | $1,151 to $1,952 | ProjectCostPro |
| Fiberglass, any style | $1,100 to $2,200 | Pella 2026 guide |
| Wood, any style | $1,100 to $2,200+ | Pella 2026 guide |
The calculator rows assume a ten-window insert job. The same calculator lists clad wood and fiberglass at about 30 to 50 years or more, against 20 to 30 for vinyl. A measured, on-site quote sets your real price. See window replacement cost for what moves it.
How the project runs
- Consult. Talk through style, color and interior finish, and look at samples.
- Measure. Premium windows are often made to order, so every opening is measured carefully.
- Confirm the order. Check sizes, finishes, glass and hardware on the paperwork before it goes to the factory.
- Install. Insert or full-frame, with flashing and sealing done to the maker's instructions.
- Finish. Interior wood may need staining or sealing. Ask who does that and when.
The window installation page explains both install methods. The Department of Energy's page on window types and technologies compares every frame material.
Care after the install
Fiberglass needs little beyond washing. With clad wood, keep an eye on the interior finish, especially on sills that take direct sun, and refinish before the wood goes gray. Check the exterior caulk joints once a year, since a failed joint is the usual way water reaches the wood.
Questions to ask the pro
- Is the fiberglass frame hollow or foam-filled?
- On clad wood, is the cladding aluminum or vinyl, and what finish is on it?
- Does interior wood come primed, stained or raw?
- What are the whole-unit U-factor and SHGC?
- What does the warranty say about the wood and the cladding?
Areas we cover for fiberglass and wood windows
Window replacement questions
- Is fiberglass better than vinyl in Texas heat?
Fiberglass moves very little with temperature and is stiffer, which helps seals and large openings. Vinyl insulates well too and costs less. Compare the NFRC ratings and the price difference for your exact windows.
- Are premium windows worth it if I might sell in a few years?
Maybe not. Their main payoff is a longer life and less upkeep, which matter most to the person who lives there for decades. If you'll move soon, compare against a good vinyl window with the same glass ratings.
- Can I mix fiberglass and vinyl windows in one house?
Yes. Some owners put premium frames on the front of the house or in main living rooms and vinyl elsewhere. Ask the pro to match the exterior color and sightlines as closely as possible, and make sure the glass ratings are the same on every elevation that faces the sun.
- Will wood clad windows rot?
The cladding protects the outside, which is where most rot starts. The interior wood still needs a good finish, and any leak at the install should be fixed quickly.
